RT-FKM72-BK
Standard · black · 72 Sh A
Chemical, high temperature
- Hardness
- 72 Sh A
- Colour
- black
- Service temperature
- −30 to +250 °C
- Thickness
- 0.5–12 mm · 11 thicknesses
- Roll
- 1200 mm × 20 m
- 0.5
- 1
- 1.5
- 2
- 3
- 4
- 5
- 6
- 8
- 10
- 12
FKM fluoroelastomer
FKM (fluoroelastomer) is chosen when a part faces aggressive chemicals, fuels or sustained high temperatures — the premium option where other rubbers fail.
Typical applications
Custom rubber gasketsRubber flange gasketsRubber chemical resistance chart
RT-FKM70-BK-P
Premium, up to +275 °C · black · 70 Sh A
Chemical, high temperature
- Hardness
- 70 Sh A
- Colour
- black
- Service temperature
- −30 to +275 °C
- Thickness
- 1–5 mm · 6 thicknesses
- Roll
- 1400 mm × 10 m
- 1
- 1.5
- 2
- 3
- 4
- 5
No reference matches this filter.
How to read our references
Every reference says what the material is: type, hardness, colour and options. Two references that look alike always differ in at least one of these parts.
- NR
- material or kind of product (NR = natural rubber, EPDM, NBR, SIL = silicone, MAT = matting, LAG = pulley lagging…)
- 45
- hardness in Shore A
- RD
- colour (BK black, RD red, YE yellow, OG orange, BU blue, WH white, GY grey…)
- BL
- options: BL bonding layer for cold bonding, FB fabric-reinforced, E economy, P premium, FG food grade…
BL (bonding layer): the back of the sheet carries a bonding layer, ready to be glued cold to steel or rubber — the usual choice for linings, chutes and pulley lagging. Without BL, the sheet is used loose, bolted or glued with a primer.
All material families
Not sure which rubber to choose?
Tell us the application (temperature, fluids, contact, environment) and we will recommend a material.