RT-SBR70-BK
Standard · black · 70 Sh A
General purpose, abrasion
- Hardness
- 70 Sh A
- Colour
- black
- Service temperature
- −30 to +70 °C
- Thickness
- 1–30 mm · 14 thicknesses
- Roll
- 1500 mm × 20 m
- 1
- 1.5
- 2
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 15
- 20
- 25
- 30
SBR rubber
Styrene-butadiene rubber (SBR) is the go-to general-purpose rubber: economical, hard-wearing and easy to cut. It suits gaskets, pads and protective parts that are not exposed to oils or to prolonged outdoor conditions.
Typical applications
Custom rubber gasketsCustom rubber washersAnti-vibration rubber padsRubber strips to sizeRubber sheets cut to sizeRubber chemical resistance chart
RT-SBR70-BK-FB
Fabric-reinforced · black · 70 Sh A
General purpose, abrasion
- Fabric reinforced
- Hardness
- 70 Sh A
- Colour
- black
- Service temperature
- −30 to +70 °C
- Thickness
- 1.5–15 mm · 9 thicknesses
- Roll
- 1400 mm × 15 m
- 1.5
- 2
- 3
- 4
- 5
- 6
- 8
- 10
- 15
RT-SBR70-BK-TK
Thick sheet · black · 70 Sh A
General purpose, abrasion
- Hardness
- 70 Sh A
- Colour
- black
- Service temperature
- −30 to +70 °C
- Thickness
- 10–50 mm · 7 thicknesses
- Roll
- 1000 mm × 1 m
- 10
- 15
- 20
- 25
- 30
- 40
- 50
RT-SBR65-BK
Higher grade · black · 65 Sh A
General purpose, abrasion
- Hardness
- 65 Sh A
- Colour
- black
- Service temperature
- −40 to +75 °C
- Thickness
- 1–15 mm · 11 thicknesses
- Roll
- 1400 mm × 20 m
- 1
- 1.5
- 2
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 15
RT-SBR65-BK-FB
Higher grade, fabric-reinforced · black · 65 Sh A
General purpose, abrasion
- Fabric reinforced
- Hardness
- 65 Sh A
- Colour
- black
- Service temperature
- −40 to +75 °C
- Thickness
- 4–6 mm · 2 thicknesses
- Roll
- 1500 mm × 10 m
- 4
- 6
RT-SBR50-BK
Soft · black · 50 Sh A
General purpose, abrasion
- Hardness
- 50 Sh A
- Colour
- black
- Service temperature
- −30 to +70 °C
- Thickness
- 2–20 mm · 9 thicknesses
- Roll
- 1400 mm × 10 m
- 2
- 3
- 4
- 5
- 6
- 8
- 10
- 15
- 20
No reference matches this filter.
How to read our references
Every reference says what the material is: type, hardness, colour and options. Two references that look alike always differ in at least one of these parts.
- NR
- material or kind of product (NR = natural rubber, EPDM, NBR, SIL = silicone, MAT = matting, LAG = pulley lagging…)
- 45
- hardness in Shore A
- RD
- colour (BK black, RD red, YE yellow, OG orange, BU blue, WH white, GY grey…)
- BL
- options: BL bonding layer for cold bonding, FB fabric-reinforced, E economy, P premium, FG food grade…
BL (bonding layer): the back of the sheet carries a bonding layer, ready to be glued cold to steel or rubber — the usual choice for linings, chutes and pulley lagging. Without BL, the sheet is used loose, bolted or glued with a primer.
All material families
Not sure which rubber to choose?
Tell us the application (temperature, fluids, contact, environment) and we will recommend a material.